AER Replacement Front Foam for Amplifiers (Domino 2/3)

This AER Replacement Front Foam is suitable for the AER Suits Domino2, Domino3, BCU2, S10P, CXL & AS360. The foam is cut to size for the corresponding amplifier model.

How To Use:

• Remove the old foam without residue.
• Behind the foam is a perforated plate bolted, that protects the speakers. Mix commercially available wood glue (Selleys Quik Grip or similar) with water in the ratio 1:3 (only a small amount is required) and mix it well.
• Dab it on both sides of the frame and the foam
• Keep the amplifier upright. to avoid liquid glue dripping on the speaker. Now paint the grid with the glue and let the grid rest for about 5 minutes.
• Now you can put the amplifier on the back and attach the new one. Press foam on the grid. (Make sure the amplifier is on a soft surface)
• After another 5 minutes, the foam is firmly attached to the grid.

Specifications:

• Dimensions: 386 x 330 x 10 mm
• Suits: AER Domino2, Domino3, BCU2, S10P, CXL & AS360
• We recommend changing the foam every 6-10 years.