Artec EDGE-BL Preamp Blender System with Piezo & Magnetic Soundhole Pickups

The EDGE-BL has a Blender EQ and basic controls of Bass, Middle, Treble and Presence. Through the AUX-INPUT jack at the bottom a Condenser Microphone or Soundhole Pickup can be connected. This pack contains both an undersaddle piezo pickup and a magnetic soundhole pickup.

Also the sound from another source can be plugged in. The Blender can control the mixing balance of the piezo sound from 4-band EQ, and the sound from AUX-Input. The Phase switch on the panel is applied to piezo sound only, therefore this can give the additional choices about Plus-Mixing or Minus-Mixing of piezo pickup sound and AUX sound. This enables you to create great tone variations.

Features:

• 4-Band EQ - Bass, Middle, Treble & Presence Controls
• Master Volume output level
• Blend the mix ratio between Piezo and AUX
• Phase Reverse Switch to reduce feedback
• Tone Switch creates a High cut of AUX sound to make soft tones
• Low Battery check LED
• Tuner Switch
• Chromatic tuner LEDs - Flat, OK & Sharp

Pack includes:

• Artec EDGE-BL Pre-amp with On-board Blender System
• Artec Piezo pickup
• Artec MSP-50 Magnetic Soundhole Pickup
• Input jack
• 9V Battery;

Specifications:

• Power Supply: 9V Alkaline Battery
• Battery Life: Over 1000 hours (without head set)
• Bass control range: ±10 dB
• Middle control range: ±10 dB
• Treble control range: ±10 dB
• Low Battery check at 5.0 V
• Piezo pickup Input Jack: 2.5 mm Mono Jack
• Magnetic pickup Input Jack: 3.5 mm Mono Jack